Water-Resistant Mascara

Author Image

By: TOM BRANNA

Editor

Water-Resistant Mascara
Ingredients
%

Phase A

  • Deionized water
  • 47.24

0

  • Veegum HV (R.T. Vanderbilt) (Magnesium aluminum silicate)
  • 0.20
  • Keltrol (Kelco Corp.)(Xanthan gum)
  • 0.20
  • Methylparaben (Ruger Chemical Co.)
  • 0.25
  • Trisodium EDTA (Ruger Chemical Co.)
  • 0.01
  • Iron Oxide Black (Sun Chemical)
  • 9.00
  • Carnuba wax (Hansotech)
  • 4.50
  • Panalane H-300E (Lipo (Ineos) (Hydrogenated polyisobutene)
  • 5.50
  • Lipo Stearic Acid (Lipo Chemicals)
  • 3.00
  • Liposorb SQO (Lipo Chemicals) (Sorbitan sesquioleate)
  • 1.30
  • Propylparaben (Ruger Chemical Co.)
  • 0.20
  • Liponate NEB (Lipo Chemicals) (C12-15 alkyl benzoate)
  • 1.00
  • Liposerve IU (Lipo Chemicals)
  • 0.10

Phase B

  • Lipo PE Base G-55 (Lipo Chemicals) (Glycerin (and) polyester-5)
  • 12.00

Phase C

  • Rose Talc (Presperse) (Talc)
  • 3.00

Phase D

  • Triethanolamine, 99% (Ruger Chemical Co.)
  • 1.50

Phase E

  • Lipobee 102 (Lipo Chemicals) (Synthetic beeswax)
  • 10.00

Phase F

  • Deionized water
  • 1.00

Procedure

In main kettle, combine phase A ingredients and heat to 70°C. Mill phase A in a colloid mill.  Add phases B and C and continue milling until pigment is dispersed uniformly.  Add phase D. In a separate kettle, combine phase E ingredients and heat to 80-84°C. Heat combined phases A, B, C and D (water phase) pigment grind to 80-84°C and mix slowly to deaerate the batch. Add combined phase E to batch under slow sweep and emulsify the batch. Cool to 35°C, and add premixed phase F. Pour the batch at 30°C into a suitable container.

More Information

Lipo Chemicals, Inc., 207 Nineteeth Ave., Paterson, NJ
(973) 345-8600, Fax (973) 345-8365, Website: www.lipochemicals.com